If you’re new to dabbing, you might be wondering what the heck is a “dab rig” and how do I clean it? Here’s everything you need to know about cleaning your dab rig.
Before we get started, let me just say this upfront: if you are trying to dab without a dab rig or an extraction pen, then keep reading because there are plenty of other ways to enjoy concentrates like wax and shatter. If you want to dab with a rig, then read on!
So, what exactly is a Dab Rig?
A Dab Rig is a device that allows you to smoke concentrate in a more discreet manner than by using a bong or other tool. A dab rig is basically a water pipe with a heating element built into it. The heating element can either be powered by electricity or battery power, depending on which manufacturer makes the device.
There are many different kinds of Dabs Rigs out there, but they all share some common elements. For instance, almost every Dab Rig has at least one chamber for storing your concentrate and one for holding water. Some have additional chambers for ice, filters, or wicks, depending on the model. They also all feature a bubbler (a tube-like attachment), and most include a USB charger. Finally, almost all Dab Rigs come equipped with a mouthpiece and/or base.
How Do I Clean My Dab Rig?
Now that you understand what a Dab Rig is, it’s time to learn how to clean it. A dab rig is very similar to a glass bong, so the best way to clean your rig is by following the same methods used for cleaning a glass bong.
The first thing you’ll want to do is to thoroughly rinse your rig with warm water and some mild soap (preferably dish soap). This will help to remove any residue left from whatever you were smoking before, as well as any tobacco residue. Once you’ve rinsed it, give it another good scrubbing with sandpaper. It should look shiny and sparkly at this point.
Once you feel confident that your rig is ready for use again, it’s time to add some fresh water to your rig. You want to fill it up until the water level is about 1 inch below the top of the bubbler. Then, turn on the heat and set it to 100 degrees Fahrenheit (38 degrees Celsius). When the temp reaches this setting, you’re ready to go!
What Kinds Of Things Should I Use To Clean My Dab Rig?
You don’t want your dab rig to become a dirty mess, so here is a list of things you can use to clean it properly:
1) Dish Soap –
While not the best choice, dish soap is fine to use when cleaning your rig.
2) Sandpaper –
Sandpaper, especially coarse grit, is perfect for removing any ash or dirt build up on the inside of your rig.
3) Vinegar –
Vinegar is great for getting rid of odors caused by smoke residue. Simply pour some vinegar down the center of your rig, leave it sit for 10 minutes, then rinse with warm water.
4) Baking Soda –
Baking soda is also great for removing odor. Pour some baking soda directly onto your rig, wait 5–10 minutes, and then rinse with warm water.
5) Ice Cubes –
If your rig hasn’t been cleaned in awhile, you may notice a buildup of mold, grime, and other contaminants. To get rid of these, simply place ice cubes in your rig and let them melt over several hours. The ice will break down all the debris on the inside walls, making it easy to wipe away with a rag.
6) Water –
The simplest way to clean your rig is to refill it with water and let it run through the entire cycle.
7) Alcohol –
If you find that you need to clean something else, such as the glass bubbler, instead of just rinsing your rig, use alcohol to clean it. After filling your rig with water, heat the water to 104 degrees Fahrenheit (40 degrees Celsius) and soak your bubbler overnight. The next day, pour off all the water and replace it with fresh water. Let it sit for another hour, then repeat the process once more.
8) Paper Towel –
If you’re feeling lazy, you can always use a paper towel to clean your rig. Just make sure to avoid putting anything combustible near your rig while doing so.
9) Old Tampons –
If you aren’t comfortable using chemicals to clean your rig, you could try using old tampons. Insert them into your rig and let them dissolve all the crud stuck between the walls.
10) Toothpicks –
If nothing else works, you can always use toothpicks to clean your rig. Just remember to only use them on the outside of your rig, and not anywhere near the heating element.
11) Dry Erase Marker –
If none of the above options work, you can always resort to using a dry erase marker. All you need to do is rub the marker across the surface of your rig until it removes all the gunk.
12) Baking Powder –
If nothing else works, you can always use baking powder to clean your rig. Sprinkle some baking powder directly onto your rig, let it sit for 30 minutes, and then rinse with hot water.
13) Cloth –
If you have a cloth, you can use it to wipe down your rig after cleaning it.
14) Bleach –
If you really, truly, absolutely, must clean your rig with bleach, only do so under supervision of a trained professional.
A person can plan to use the cannabis rigs that are available in market. This will help the people in reaching the goals that will give effective results. The main matter of concern is to have good results that will give favorable results. A person can search for the right platform that sells such products.
Are There Other Ways To Clean Your Dab Rig?
While the above methods are all legitimate ways to maintain your Dab Rig, you might find that none of them quite fit your needs. In that case, you might consider finding a cleaner, or even a professional who specializes in cleaning Dab Rigs. Professional cleaners usually charge around $100 per job, but you can save some money just by performing your own maintenance yourself.